当前位置:首页 > 产品展示

经营范围橡胶种植 加工 收购 销售

5号橡胶

223.jpg

西双版纳圣凯橡胶有限公司生产的5号橡胶杂质低,在0.05%以下,没有门尼要求但85%以上产品都能达到(60-90)范围,原料采用当地经过储存的胶团或胶片为生产原料,经过本公司工艺处理后橡胶质量有非常好的强度性能,5号橡胶可以制作一切要求强度耐磨特性的橡胶制品:子午轮胎、密封件、汽车配件、振动垫、桥梁垫、防护垫等。

Xishuangbanna SAN kai rubber co., LTD., production of rubber material is low, 5 under 0.05%, no doors, but more than 85% products can reach the range (60-90), raw material USES the local after storage of micelles or film as raw material, after the company processing quality of rubber has very good strength, 5 rubber can make all the required strength wear-resisting properties of rubber products: radial tire, seals, auto parts, bridge vibration cushion, cushion, protector, etc.


SCR包装胶块指标 SCR packaging rubber block index 

1.块重量:33.33±0.02kg、

2.外胶形尺寸:长660mm*宽310*厚度180-200mm

3.单包装:单层包装---包装袋薄膜厚度0.09±0.01mm(用胶前除袋)

4.大包装:一个6米的集装箱可容纳16个紧缩托盘大包装,每大包装包着36*33.33kg的胶包,每个大包装净重量是1200kg,内层包装袋薄膜厚度0.03±0.05mm,每个托盘有六层,每层有六胶包,每层有一片隔离薄膜(厚度0.09±0.01mm):外套紧缩立体薄膜袋(厚度0.19±0.01mm);采用木托盘。

5.所有包装袋薄膜材料采用低密度高压聚乙烯(LDPE),最终熔点≤109℃,比重=0.92,为了避免胶包之间相粘,包装温度不可超过55℃.

1.Glue weight:33.33±0.02kg、

2.Dimensions: 660mm * wide 310 * thickness 180-200mm

3.Packing: single-layer packaging - the thickness of the bag film is 0.09 + 0.01 mm.

4.Packing: a 6 m container can accommodate 16 tightening pallet packaging, each big package wrapped in 36 * 33.33 kg of plastic bags, each big packing turnning is 1200 kg, 0.03 + / - 0.05 mm, inner packaging film thickness for each tray has six layers, each layer has six plastic bag, each layer has a isolation membrane (0.09 + / - 0.01 mm thickness) : tight jacket stereo film bag (0.19 + / - 0.01 mm thickness); Wooden pallet

5. All packaging film materials using high pressure low density polyethylene (LDPE), melting point 109 ℃ or less, eventually ratio = 0.92, in order to avoid the glue stick between package, packing temperature not more than 55 ℃


上一产品:没有了!

下一产品:10号橡胶